Click image to view full size image
Description
The LHRB-16A is portable electric Rebar bender helps save man-hours by bending rebar up to 32mm grade 60 from 0-135 degrees in-place at the job site
The 1-90 degree bending capacity takes less than four seconds , This tool draws less than 9 Amps and can easily be used with a standard 120V extension cord.
It is the perfect tool for bending tails in block wall Construction! Widely used for bending and straightening in railway, Bridges,steel reinforcement cage ,basement,building caps,cast-in-place
Specification:
Model: LHRB-16A
Voltage:220V/110V
Power:1100W-1600W
Bending speed:2-6s
Bending Range:4-32mm
Net weight:13.8-23KG
Dimensions (w/ side handle) L x W x H: :630*150*155mm
Packing Size L x W x H:670*150*155mm
Operating rebar bender
1. Insert rebar(s) in between the pivot shoe and housing so that the rebar is at right angles to the pivot shoe/housing.
2. Throttle the on/off switch until the rebar has reached your required angle.
3. After the bend, release the on/off switch and turn the valve lever to the open position to return the piston to the starting position. The piston will not return automatically when the on/off switch is released.
 |
 |
 |
Package
Should you be interested in any of our products, please contact us directly. Thanks!
Email:
Mobile phone/Whatsapp:0086-18802956872
http://www.langvicmachinery.com/